Does American Axle & Manufacturing sponsor H-1B visas?
Yes — American Axle & Manufacturing, Inc. filed 83 H-1B and E-3 labor condition applications that the US Department of Labor certified between 1 October 2023 and 30 June 2026, 19 of them in FY2026 (to 30 Jun). It also had 23 PERM labor certifications (the first step of most employer-sponsored green cards) certified in the same period.
American Axle & Manufacturing, Inc.
- Certified LCAs, FY2024–FY2026
- 83
- Certified, FY2026 (to 30 Jun)
- 19
- Denied LCAs
- 0
- PERM certified
- 23
- Most-filed title
- Senior Systems Engineer
- Its median offered wage
- $124,348
- Employer state on filings
- Michigan
- Distinct certified titles
- 65
American Axle & Manufacturing H-1B filings by fiscal year
Labor condition applications decided in each US fiscal year (1 October to 30 September). FY2026 (to 30 Jun) covers decisions to 30 June 2026 only. Worker positions is the most workers the certified applications may cover, as declared by the employer, not a count of people hired. Some employers file blanket applications covering up to 100 positions each, which inflates this figure.
| Fiscal year | Certified | Certified, later withdrawn | Denied | Withdrawn | Worker positions |
|---|---|---|---|---|---|
| FY2024 | 28 | 0 | 0 | 1 | 28 |
| FY2025 | 36 | 0 | 0 | 0 | 36 |
| FY2026 (to 30 Jun) | 19 | 0 | 0 | 0 | 19 |
| Total | 83 | 0 | 0 | 1 | 83 |
What American Axle & Manufacturing pays sponsored workers
Every labor condition application names a prevailing-wage level from the Department of Labor's wage survey: level I is entry level, II qualified, III experienced and IV fully competent. "No level" means the employer set the prevailing wage from another source, such as a private survey or a union contract. Counts are American Axle & Manufacturing's 83 certified LCAs decided between 1 October 2023 and 30 June 2026 (FY2024–FY2026; latest decision in the data 30 June 2026). Wages are the offered "rate of pay from", annualised, not actual pay.
| Wage level | Share of certified LCAs | Certified LCAs | Median offered wage |
|---|---|---|---|
| Level Ientry | 1% | 1 | $90,514 |
| Level IIqualified | 16% | 13 | $146,000 |
| Level IIIexperienced | 29% | 24 | $128,276 |
| Level IVfully competent | 54% | 45 | $130,000 |
| No levelother wage source | 0% | 0 | — |
| All levels | 100% | 83 |
The most common level is IV (fully competent), at 54% of certified LCAs. Its median offered wage is $130,000 a year. The job-title table below shows the level mix for each of the 15 most-filed titles.
American Axle & Manufacturing H-1B salaries by job title
The 15 most-filed of 65 distinct job titles on certified LCAs. Wages are the offered "rate of pay from" on each application, annualised (hourly × 2,080), not actual pay. "Middle 50%" is the 25th to 75th percentile. Under each title is the share of its certified LCAs at wage levels I to IV (shaded light to dark) and with no level.
| Job title as filedand its wage-level mix | Certified filings | Median wage | Middle 50% |
|---|---|---|---|
| Senior Systems EngineerIII 25% · IV 75% | 4 | $124,348 | $124k–$126k |
| Lead Software EngineerII 67% · IV 33% | 3 | $148,000 | $141k–$153k |
| Senior Analytical EngineerIII 67% · IV 33% | 3 | $115,000 | $114k–$118k |
| Senior NVH Analytical EngineerIII 33% · IV 67% | 3 | $130,000 | $122k–$133k |
| Controls Engineer - DrivelineII 100% | 2 | $90,921 | $91k–$91k |
| Lead Analytical EngineerIV 100% | 2 | $145,385 | $144k–$146k |
| Lead Product Engineer - Actuation SystemsIV 100% | 2 | $119,377 | $119k–$119k |
| Manager Application EngineeringIII 100% | 2 | $171,884 | $170k–$173k |
| Senior CFD EngineerIII 50% · IV 50% | 2 | $118,180 | $117k–$119k |
| Senior Electrical Systems Validation EngineerIII 50% · IV 50% | 2 | $130,963 | $129k–$132k |
| Senior Embedded Software EngineerIV 100% | 2 | $124,043 | $122k–$126k |
| Technical ManagerIII 50% · IV 50% | 2 | $174,627 | $173k–$176k |
| Technical Manager - Power ElectronicsIV 100% | 2 | $152,671 | $148k–$157k |
| Analytical Engineer - CAEIII 100% | 1 | $106,570 | $107k–$107k |
| Analytical Engineer - NVHIII 100% | 1 | $109,725 | $110k–$110k |
Where the jobs are
Worksite state on certified LCAs (top 1).
| Worksite state | Certified filings |
|---|---|
| Michigan | 83 |
Visa classes
All LCA filings by visa class, any status. H-1B1 is for citizens of Chile and Singapore; E-3 for Australians.
| Visa class | Filings |
|---|---|
| H-1B | 83 |
| E-3 Australian | 1 |
Does American Axle & Manufacturing sponsor green cards?
It also had 23 PERM labor certifications (the first step of most employer-sponsored green cards) certified in the same period. A certified PERM application means the Department of Labor accepted the employer's labor-market test; the worker still needs an approved I-140 petition and a green card from USCIS.
| Fiscal year | Certified | Denied | Withdrawn |
|---|---|---|---|
| FY2024 | 0 | 0 | 0 |
| FY2025 | 12 | 0 | 0 |
| FY2026 (to 30 Jun) | 11 | 0 | 0 |
| PERM job title | Certified | Median wage |
|---|---|---|
| Senior Software Requirements Engineers | 2 | $112,708 |
| Sr. Computational Fluid Dynamics Engineers | 2 | $112,200 |
| Analytical Engineer - NVH | 1 | $104,473 |
| Director Global Quality Systems | 1 | $180,250 |
| Lead Engineers - Electrification Hardware | 1 | $139,050 |
| Lead Requirements and Software Validation Engineers | 1 | $191,339 |
| Lead Software Test Engineers | 1 | $150,090 |
| Lead Software Validation Engineers | 1 | $143,222 |
| Lead Systems Engineer - Thermal | 1 | $131,950 |
| Managers, Engineering Project Management | 1 | $154,577 |
UK sponsor licence
We found no organisation with a matching name on the UK Home Office register of licensed worker sponsors (13 October 2026). A UK subsidiary trading under a different name may still hold a licence.
How to read these numbers
- An LCA is the first step
- Before filing an H-1B, H-1B1 or E-3 petition, the employer files a labor condition application (LCA) with the Department of Labor, stating the job, worksite and the wage it will pay.
- Certified is not a visa
- A certified LCA means the Department of Labor accepted the wage attestation. It is not an approved petition or an issued visa, and it does not mean the role is still open or that the employer will sponsor you.
- Counts are applications
- One LCA can cover several workers, and employers often file more LCAs than they use (for example for the H-1B lottery or a worksite change). Read the totals as a measure of sponsorship activity, not of hires.
Other legal entities with similar names
Filings are counted per legal name. These entities file under names that start with, or closely match, American Axle & Manufacturing. They may be affiliates or unrelated companies, so they are not added to the numbers above.
| Legal name on filings | Certified LCAs | PERM certified |
|---|---|---|
| AMERICAN AXLE MANUFACTURING, INC. | 0 | 4 |
Questions
Does American Axle & Manufacturing sponsor H-1B visas?
Yes — American Axle & Manufacturing, Inc. filed 83 H-1B and E-3 labor condition applications that the US Department of Labor certified between 1 October 2023 and 30 June 2026, 19 of them in FY2026 (to 30 Jun). It also had 23 PERM labor certifications (the first step of most employer-sponsored green cards) certified in the same period.
What does American Axle & Manufacturing pay H-1B workers?
On its certified LCAs, American Axle & Manufacturing, Inc.'s most-filed title was Senior Systems Engineer (4 filings), with a median offered wage of $124,348 a year and the middle half between $123,688 and $125,531. These are wages the employer stated on the application, not actual pay.
What wage level does American Axle & Manufacturing file H-1B jobs at?
Most of American Axle & Manufacturing, Inc.'s certified LCAs in FY2024–FY2026 were at prevailing-wage level IV (54%, median offered wage $130,000 a year). By level: level I 1% (1 filing, median $90,514); level II 16% (13 filings, median $146,000); level III 29% (24 filings, median $128,276); level IV 54% (45 filings, median $130,000). Level I is entry level and level IV is fully competent, in the Department of Labor's wage survey.
Does American Axle & Manufacturing sponsor green cards?
It also had 23 PERM labor certifications (the first step of most employer-sponsored green cards) certified in the same period.
Is American Axle & Manufacturing a licensed UK visa sponsor?
We found no organisation with a matching name on the UK Home Office register of licensed worker sponsors (13 October 2026). A UK subsidiary trading under a different name may still hold a licence.
Check any company, or get their live jobs tagged with sponsorship evidence.
Look up American Axle & Manufacturing alongside any other employer, or pull their open roles from Greenhouse, Lever, Ashby, Personio and Teamtailor with each job tagged by how often the employer filed for a similar title, and the wage it offered.
Hiring, not job hunting? Get a free check of whether Google and Claude mention your business. Or get the weekly list of jobs at visa-sponsoring employers, $19 a month, first week free.